ORIGINAL LOWRIDER 26" Bent 1" Black Durable Suspension Retro Springer

Model/Style: 26" Bent Spring(er) Fork, classic lowrider style

Wheel Size: 26"

Steerer Type: 1" threaded (fits 22.2 mm quill stems)

Steerer Inside Diameter (ID): 22.2 mm

Steerer Length: 195 mm total (approx. 109 mm threaded)

Axle Slot Size: 3/8" (9.5 mm)

Material: Steel (heavy-duty, show-bike friendly)

Finish/Color: Black 

Bar/Leg Length: 22-1/4" (fork leg/bar length)

Brand: Original Lowrider

Headset: For 1" threaded headsets. Crown race size is the standard for most 1" threaded springer forks; match to your headset’s race (common sizes are 26.4 mm ISO or 27.0 mm JIS—measure your headset/race to confirm).

Stem: 22.2 mm quill stems (standard BMX/retro cruiser quill size).

Front Wheel: Hubs with 3/8" axles drop straight in.

Frame Head Tube: Works with most 26" cruiser/lowrider frames sized for 1" threaded forks; verify head tube length vs. the 195 mm steerer (you want a few mm of thread above the top locknut).

Tire Clearance: Typical clearance for classic balloon/cruiser tires up to 26 × 2.125" (varies by rim/tire—oversized or square-profile tires should be test-fitted).

Brakes: Traditional lowrider springers usually do not have disc mounts and usually do not have V-brake/canti bosses. Many builds use a side-pull/caliper brake if there’s a crown hole, or coaster brake wheels. Check your intended brake setup.

Classic “bent” springer geometry for that period-correct lowrider stance.

Steel springs and linkages for durability and the signature springer look (designed more for style/comfort than modern suspension performance).

Black finish suited for show bikes; wipe down after rides to maintain shine.

Fork assembly as shown: springer legs, rockers/links, main fork, and top spring unit (typical complete springer set).