Led Bike Tail Light Bicycle

Product Features: Standby Time: The main unit is on standby for up to 4-8 months, and the remote control is up to 3-5 years. Super Bright: 31 LED lights, up to 160 lumens powerful strobe lights alert drivers at night and during the day, improving your visibility and safety. Anti-theft Alarm Function: scare off thieves to protect the car, remove the remote control to arm when parking, high-decibel sound and light alarm to scare off thieves, in the armed alert state, such as touching or tapping the bicycle, the host will sound a warning sound for 2 seconds, 2- If you touch or tap again within 12 seconds, the host will sound a continuous alarm for 30 seconds (multiple sound effects loop). Warning: In the disarmed state, keep pressing the light button of the remote control until the indicator light of the remote control turns off and turns on again, and the host emits a "beep" to enter the parameter setting function. At this time, the bell button of the remote control will cycle through three Electric bells (electric car horns, horns, bird calls). Left and Right Steering Keys: Press the Left and Right Steering Keys when you want to turn, it will send out a sound and light steering prompt similar to a car, the turn signal will automatically turn off after 2 minutes, and return to the previous state. If you want to end earlier, you can press the same direction key again ( Pressing the arm/disarm key or the light key can also end early) Brake: Lightly brake and brake suddenly, the brake light will be highlighted immediately. When the tail light is turned on (except the "emergency double flash" mode), there is a braking action while riding, and the tail light will be highlighted red for 2 seconds. Night Travel: When crossing a tunnel or walking at night, the warning light will automatically turn on. Intelligent and automatic "slow flash" or "breathing" mode, the tail light will automatically detect the brightness of the riding environment after 30 seconds of lighting, and it will automatically turn off when it is on. Riding, the vibration trigger automatically lights up. Six Warning Taillight Modes: Press the "light" button on the remote control or the "light switch" button on the main unit to cycle through the six warning taillight modes. Red light: slow flashing-breathing-burst flashing-constant light; yellow light: emergency double flashing; yellow light: tail light off (turning on/off the tail light has an animation effect, the number of flowing left/right lights indicates the current battery level, 4 bars are full Electricity, 3 cells 70%, 2 cells 40%, 1 cell 15%, please charge in time when the battery is 15%) Applicable Bicycles: Mountain bikes, baby bikes, road bikes, commuter bikes, ladies bikes, regular bikes, electric bikes, etc. How To Use Installation Notes Tail light installation 1. Put the silicone ring on the proper position of the seat post; 2. Put the tail light bracket into the silicone ring, align the outline on the silicone ring, and fix it with screws; 3. Insert the bicycle tail light into the tail light bracket. Remote control installation 1. Put the silicone ring on the handlebar in a suitable position; 2. Put the remote control bracket on the silicone ring, align the outline on the silicone ring, and fix it with screws; 3. Press and turn the remote control counterclockwise until it locks into place. Note Please fully charge it before using it for the first time, otherwise the remote control cannot be used normally. Product Specification Type: Bicycle Steering Brake Tail Light Colour: Black Material: PC + Anti-UV Material Tail Light Size: 125x50x33mm (4.92x1.97x1.3in) Remote Control Size: 45x41x17mm (1.77x1.61x0.67in) Function: Warning + Brake + Steering + Electric Bell + Anti-Theft Wireless Distance: Open 30~60 Meters Power Supply: USB Lighting Mode: 6 Lighting Mode Red light: slow flashing-breathing-burst flashing-constant light Yellow light: emergency double flashing Yellow light: tail light off Tail Light Battery: 3.7V 2000mAh Lithium Battery (Included) Remote Control Battery: CR2032 Host Charging Interface: Standard USB-C 5V Tail Light Standby Time: 4~8 Months Remote Control Standby Time: 3~5 Years (30 Times A Day) Transmitting And Receiving Frequency: 433.92MHz Working Environment: -40~+60℃ Working Environment Humidity: <80% Storage Temperature: -40~+70℃ Waterproof: IP54 Noise level: 110dB Bulb Type: LED LED Quantity: 31 LED Lumens: Up to 160 lumens Power Display: 4 bars are full Electricity, 3 cells 70%, 2 cells 40%, 1 cell 15% Applicable bicycles: Mountain bikes, baby bikes, road bikes, commuter bikes, ladies bikes, regular bikes, electric bikes, etc. Package Included 1 x Bicycle Tail Light 1 x Remote Control 1 x Remote Control Holder 1 x Tail Light Holder 1 x Mounting Bracket 1 x Charging Cable 1 x Lanyard 1 x Set Of Screw Installation Tools 1 x Instruction Manual

Returns Accepted for this item if it's within 30 Days